These are low-noise drivers designed to drive a piezo stage by applying a voltage. They can be each used as an external power supply in cases where the current is inadequate for an open-loop operation or with a driver contained in the controller.
Two methods for voltage output
The user can manually adjust the output from 0 to 150 V by turning a “BIAS ADJUSTMENT” dial on the front panel. The output voltage value can be checked on an indicator*.
* An indicator of PH103 is optional
- ②External control
If an analog voltage (0 to 10 V) is input to the “Input” terminal on the rear panel, the input voltage will be amplified by 15 times to 0 to 150 V, and the amplified voltage will be output. Driving according to the waveform or frequency of the input voltage can be achieved.
By output currents, three types: “standard-capacity,” “medium-capacity” and “large-capacity” are selectable from.
|Model number||Type||Number of connectable axis||Input voltage||Output voltage||Output current||Monitor output||Power supply||Size
|PH103||Standard capacity||1Axis||0～10V||0～150V||40mA||500mA||Fifteenth part of output voltage||AC100～120V / AC200～240V
|PH301||Medium capacity||1A||±5A||AC100V ±10%,50/60Hz||W260×D314×H139|
Please wait while the form is displayed.
Excuse me, but if you wait a moment and the form does not appear, please contact here .
Precision Motor Stage
Examples of product application